Thread: what kind of power?

Tweet

hey can any one tell me what hp and tq these two combos will make in a 350 with 9.1:1 cr thanks alot

(all summit part numbers)

cam: Edelbrock Performer RPM Cam EDL-7102
Hydraulic Flat Tappet, Advertised Duration 308/ 318, Lift .488/ .510
heads: Dart Iron Eagle Cylinder Heads DRT-10121111
64cc Chamber, 180cc Intake 2.020 in 1.600 in.
intake: Edelbrock Performer RPM Air-Gap EDL-7501
carb: bg choke less 650 dp
dist: msd pro billet with 6al and blaster 2



cam: Edelbrock Torker-Plus Cam EDL-5002
Hydraulic Flat Tappet, Advertised Duration 292/ 300, Lift .488/ .488,
heads: Dart Iron Eagle Cylinder Heads DRT-10121111
64cc Chamber, 180cc Intake 2.020 in 1.600 in.
intake: Edelbrock torker or Torker II Intake Manifolds
carb: bg choke less 650 dp
dist: msd pro billet with 6al and blaster 2

I get something like 370 HP at 5,000 rpm, 426 lb-ft torque at 3,500 rpm. Not enough difference to spit at between the cams. Run the hydraulic.

Kitz

Originally Posted by justmejohn71

hey can any one tell me what hp and tq these two combos will make in a 350 with 9.1:1 cr thanks alot

(all summit part numbers)

cam: Edelbrock Performer RPM Cam EDL-7102
Hydraulic Flat Tappet, Advertised Duration 308/ 318, Lift .488/ .510
heads: Dart Iron Eagle Cylinder Heads DRT-10121111
64cc Chamber, 180cc Intake 2.020 in 1.600 in.
intake: Edelbrock Performer RPM Air-Gap EDL-7501
carb: bg choke less 650 dp
dist: msd pro billet with 6al and blaster 2



cam: Edelbrock Torker-Plus Cam EDL-5002
Hydraulic Flat Tappet, Advertised Duration 292/ 300, Lift .488/ .488,
heads: Dart Iron Eagle Cylinder Heads DRT-10121111
64cc Chamber, 180cc Intake 2.020 in 1.600 in.
intake: Edelbrock torker or Torker II Intake Manifolds
carb: bg choke less 650 dp
dist: msd pro billet with 6al and blaster 2

Heads are the right size along with the carb.
Good intake.
Overall very well matched.
The only thing I see is the comp. ratio.
The .488/.510 has a 234/244 at .050.With this cam you really need 10 to1 as a comp. ratio I.M.O.
With the 9 to 1 comp. ratio I would try this one .465/.488 duration at .050 224/234.

with the .465/.488 duration at .050 224/234 cam what kind of power numbers could that make because i have one of those cams im thinking of putting in a 350 with 9 to 1 compression and a ported set of 487 casting heads. its a cheapo motor i want to build with parts i have laying around for a fun little g-body car.

Originally Posted by GTO389

with the .465/.488 duration at .050 224/234 cam what kind of power numbers could that make because i have one of those cams im thinking of putting in a 350 with 9 to 1 compression and a ported set of 487 casting heads. its a cheapo motor i want to build with parts i have laying around for a fun little g-body car.

If your heads flow good numbers and everything else is matched intake,carb, etc. it is enough cam to make 1 hp per cubic inch.

Originally Posted by justmejohn71

hey can any one tell me what hp and tq these two combos will make in a 350 with 9.1:1 cr thanks alot

(all summit part numbers)

cam: Edelbrock Performer RPM Cam EDL-7102
Hydraulic Flat Tappet, Advertised Duration 308/ 318, Lift .488/ .510
heads: Dart Iron Eagle Cylinder Heads DRT-10121111
64cc Chamber, 180cc Intake 2.020 in 1.600 in.
intake: Edelbrock Performer RPM Air-Gap EDL-7501
carb: bg choke less 650 dp
dist: msd pro billet with 6al and blaster 2



cam: Edelbrock Torker-Plus Cam EDL-5002
Hydraulic Flat Tappet, Advertised Duration 292/ 300, Lift .488/ .488,
heads: Dart Iron Eagle Cylinder Heads DRT-10121111
64cc Chamber, 180cc Intake 2.020 in 1.600 in.
intake: Edelbrock torker or Torker II Intake Manifolds
carb: bg choke less 650 dp
dist: msd pro billet with 6al and blaster 2

I agree with Erik, run the cam that he recomended along with the Air gap intake. You should make somewhere around 370 horses with that combination. Don't run a torker intake, the torker II's are alright.