Quote Originally Posted by justmejohn71
hey can any one tell me what hp and tq these two combos will make in a 350 with 9.1:1 cr thanks alot

(all summit part numbers)

cam: Edelbrock Performer RPM Cam EDL-7102
Hydraulic Flat Tappet, Advertised Duration 308/ 318, Lift .488/ .510
heads: Dart Iron Eagle Cylinder Heads DRT-10121111
64cc Chamber, 180cc Intake 2.020 in 1.600 in.
intake: Edelbrock Performer RPM Air-Gap EDL-7501
carb: bg choke less 650 dp
dist: msd pro billet with 6al and blaster 2



cam: Edelbrock Torker-Plus Cam EDL-5002
Hydraulic Flat Tappet, Advertised Duration 292/ 300, Lift .488/ .488,
heads: Dart Iron Eagle Cylinder Heads DRT-10121111
64cc Chamber, 180cc Intake 2.020 in 1.600 in.
intake: Edelbrock torker or Torker II Intake Manifolds
carb: bg choke less 650 dp
dist: msd pro billet with 6al and blaster 2
Heads are the right size along with the carb.
Good intake.
Overall very well matched.
The only thing I see is the comp. ratio.
The .488/.510 has a 234/244 at .050.With this cam you really need 10 to1 as a comp. ratio I.M.O.
With the 9 to 1 comp. ratio I would try this one .465/.488 duration at .050 224/234.