Thread: 305 Smallblock build

Tweet

I did the 343 hp build on mine.
.030 over block
.10 under crank
sfi balancer
balanced
electric fan
electric fuel pump
H.O. 305 heads
double roller timing chain
single plane eddy brock
262 xe comp cam
rhodes lifters
full roller rockers
rams horns
600 cfm carb
HEI
accell ignition
static compression about 9.5:1
dynamic compression about 8.4:1
I am hoping to get about 300 hp out of it.

We are thinking towards the comp cams xtreme energy 268 cam with a set of full port and polished 601 casting heads, with pro magnum roller rockers, about what size carb you think we should go with, would a 600 performer be fine, still undecided on the intake though, thinking of an edelbrock performer, performer rpm, edelbrock torquer, or a weiand xcellerator, the one with the straight runners, not the one that looks kinda like a torquer. We have a while to build it so surely we will decide on something. The 400 horse build looks nice but we don't need horsepower at 7200 rpms, thats the idea behing using a xe 268 cam, the 400 horse build used a 292 magnum.