Thread: 385 fast burn crate engine 350ci

Tweet

Originally Posted by erik erikson

L.O.L,I already have a trophy I want a shrine.

Just rub it!

i have decided to go with the zz465 build. 465hp and 440tq, ive decided to use the gm cam 12370847-234/242 539/558 with the 1.6 roller rockers. im now stuck on the springs, dont know if the behive springs will work on the fast burn heads.i would of loved to do the zz430 but you always want more. not only that but i want to see the ricers in my rear view mirror. i will use the air gap rpm intake.with the six speed behind the 465hp i should be at 430hp at wheels with the 373 gear.march is around the corner and i hope to have this thing up and running then. hopefully ill keep my finger crossed hope i dont bent a rod push rod not a crank rod lol. ive never assembled an engine with high lift.

Originally Posted by junior2

i have decided to go with the zz465 build. 465hp and 440tq, ive decided to use the gm cam 12370847-234/242 539/558 with the 1.6 roller rockers. im now stuck on the springs, dont know if the behive springs will work on the fast burn heads.i would of loved to do the zz430 but you always want more. not only that but i want to see the ricers in my rear view mirror. i will use the air gap rpm intake.with the six speed behind the 465hp i should be at 430hp at wheels with the 373 gear.march is around the corner and i hope to have this thing up and running then. hopefully ill keep my finger crossed hope i dont bent a rod push rod not a crank rod lol. ive never assembled an engine with high lift.

Thank-goodness.
I thought we where going to beat another "dead horse".