Thread: small block chevy
Hybrid View
-
12-02-2006 05:06 PM #1
small block chevy
i have a 350 4 bolt main block flat-tops pistons,trw floating rods the pistons and the rods might have 5000 miles on them i did a new rebuild on the motor but was thinking of making a 383 can i still use my piston and rods and just by the crank and fly wheel and blancer and will i have to do some machine work to the block or piston or rods and the block is bored 60 overmeat1037
-
12-02-2006 06:27 PM #2
Originally Posted by demetrice askew
You will need a different flexplate and a different balancer.
You may need to do some rod bolt prep and also block prep.
-
12-02-2006 08:00 PM #3
what kind rod bolt prep and block prepmeat1037
-
12-02-2006 09:59 PM #4
Originally Posted by demetrice askew
So about the only thing you can salvage are your rods. If your bearings are still good, and if your current rotating assembly was balanced, you might just want to try and sell the short block and start over.Objects in my rear view mirror are a good thing unless,.... they have red and blue lights flashing.
I had to go to the doctor's this morning. He told me that my sugar was too high so I came home and put it on a lower shelf. I feel better already.
the Official CHR joke page duel