Quote Originally Posted by demetrice askew
i have a 350 4 bolt main block flat-tops pistons,trw floating rods the pistons and the rods might have 5000 miles on them i did a new rebuild on the motor but was thinking of making a 383 can i still use my piston and rods and just by the crank and fly wheel and blancer and will i have to do some machine work to the block or piston or rods and the block is bored 60 over
You can use your rods.
You will need a different flexplate and a different balancer.
You may need to do some rod bolt prep and also block prep.