Originally posted by CamaroCanada
Well. This is what it might be. let me know i ad the DOTS on the camshaft But facing up dead Centre. a friend said it was WRONG so i made them face each other and set the timing to that sinse That it has Started could that be it? do i have to tak it apart again and make em face Top up dead centre? or is there a easy way around it!
if you put the cam dots, dot to dot : and put the dist. on #1 without turning the motor then thats whats wrong. you are off 180 degrees. dot to dot is #6. you need to pull #1 plug out and find TDC and and get you rotor on #1.