Thread: Problem Starting
Results 1 to 14 of 14
LinkBack URL
About LinkBacksHybrid View
-
05-24-2005 07:46 PM #1
CHR Member
- Join Date
- Aug 2004
- Location
- rustburg,
- Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
- Posts
- 4,093
pull #1 PLUG, put your finger over thr hole, bump motor around untill it blow you finger off of the plug hole. put timing mark on 0 or TDC on the HB. then set the rotor at #1 in the cap. should be in time.Originally posted by CamaroCanada
So every Burst Should Be. should Be on the Timing Mark?Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
".......So sanded it all down and resprayed. ......" Been there. done that on a couple of paint jobs over the years. Usually took me a couple of days to get over being mad before I started...
Stude M5 build