Ok,

i came across two deals so sweet it doesn't even make since, I got a FREE 85 chevy 4 bolt main block.. There is a guy who works at a shop owes me a engine build..so im getting it built for free.. Im gonna keep the dome pistions in the motor.. the heads have already been gone through (stock).. the crank is getting turned as we speak.. yada yada

Then i found a guy who seems to change cams ever damn week when he goes the the track.. hes into roller cams now.. but he had a hyd .525 lift cam.. either crane or comp.. (streetable duration) one of the two.. well he's selling the..springs valves liftes etc.. with the cam for $150 bucks mostly,because we belong to the same malibu car club

So if i take this 350 block put that cam in it with the stock heads.. my eldbrk performer rpm intake.. 650 holley carb.. and headers on it.. what hp should i be looking for right as this point..

i plan on looking for some heads soon....

as you may have read before i have a 355 i pulled out, and i was gonna go 383 or rebuild till i came across this.. .