Originally posted by 1JohnnyO
Sounds like a sweet deal, good luck....just be really careful on the cam, I have never-----never-----had any luck with a used cam. Make sure the lifters that went with it are put back exactly where they came from. If that cant happen, dont do it...and I have heard people say you can use a used cam with new lifters. Again, no luck here....my machinist says the same thing. And remember, if the cam goes away, so do your new bearings and the rest of your new rebuild. Be careful!! But have fun, and good luck. John
im not to worried about the cam, has about 10 miles on it...