Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Could use some help on CAM specs, Timing and idea please!
          
   
   

Results 1 to 9 of 9

Threaded View

  1. 04-25-2017 11:38 PM #5
    BigBlock1984
    BigBlock1984 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2017
    Location
    Belpre
    Posts
    5

    Glenn the numbers come back as a 73-76 C30, Chevelle, or a Corvette. Yea, the truck was originally a V6, believe would have been a special order vehicle since its a 4x4. I'll re-run numbers again tomorrow. I had them saved when we put Cam/rebuild kit on. Leaning more towards the C30. As well any recommended sites to get the Pistons? I looked around a bit. Not sure 100% how to properly do the Ratios to figure what some of the Pistons Compression is sadly.
    Last edited by BigBlock1984; 04-25-2017 at 11:43 PM.
    Reply With Quote Reply With Quote

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink