Thread: Advice on Arias Heads
Threaded View
-
03-14-2014 07:30 AM #1
Advice on Arias Heads
So here it goes...
I have a 67 chevelle that currently has a 2 bolt 454 +.30, scat cast 10:1 rotating assembly with some Dart Iron Eagle 308's, the tranny is an M21 out of a 67 vette and has a Spooled rear- end with 4.88's. I put most of it together on a budget while going through college. it has been sitting for about 5 years now - there's a little back history...
Now I'm going to be pulling the car out of storage in a year or so and was thinking about putting together a 525/ 540 short block possibly aluminum -thoughts?
But I happened upon the Arias BBC HEMI heads and was very intrigued. I was wondering if anyone had run these before, and wanted their input, also what kind of comp. ratio id need to be looking at to support the possibility of a blower? The car will be a street/strip car, Thanks for any input!
So in short:
-thoughts on aluminum blocks?
-thoughts on C.I.D. to Heads pairing?
-thoughts on Cam and compression ratio with a possibility of adding a blower
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel