Thread: Need help on Tall Deck 427
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
10-18-2009 11:07 AM #1
Registered User
- Join Date
- Oct 2009
- Location
- Columbia
- Car Year, Make, Model: 1934 ford 3 window coupe
- Posts
- 1
Need help on Tall Deck 427
Hello,
Has anyone or does anyone know if this combo will work?
Tall deck 427
Deck 10.20
bore 4.310
Stroke 4.250
Rod 6.800
Pistons compression height 1.270 -3cc 8.7:1
118cc Heads
Math says it will work but will the rods clear OK? Thanks for any help or commits. I have this stuff taking up space so I thought I might try and build a 496.Last edited by cty57892; 10-18-2009 at 11:10 AM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-18-2009 11:20 AM #2
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
the block may need some work for the rods to swing thru some of the older block s are not cut out for much more then the 3.760 crank . some of the last IV blocks GM made before the V blocks had the casting open up like a 454 crank case and a 4 1/2 crank will just about drop in with not much work with H beam rods will help or any rod with short cap screws boltsLast edited by pat mccarthy; 10-18-2009 at 09:24 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
On a bitterly cold winter morning a husband and wife were listening to the radio during breakfast. They heard the announcer say, "We are going to have 8 to 10 inches of snow today. You must park...
the Official CHR joke page duel