Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Need help on Tall Deck 427
          
   
   

Results 1 to 2 of 2

Threaded View

  1. 10-18-2009 11:20 AM #2
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    the block may need some work for the rods to swing thru some of the older block s are not cut out for much more then the 3.760 crank . some of the last IV blocks GM made before the V blocks had the casting open up like a 454 crank case and a 4 1/2 crank will just about drop in with not much work with H beam rods will help or any rod with short cap screws bolts
    Last edited by pat mccarthy; 10-18-2009 at 09:24 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink