Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Scat or Eagle?
          
   
   

Results 1 to 15 of 19

Threaded View

  1. 11-28-2007 05:58 PM #17
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    yep all the scat stuff i have used i just had one crank that i had to send back was one 4340 that look like it was polish with 80 grit .i run the tq up and down on the rods then touch them up on the sunnen hone .i do not care for the housing bore size on the rods on the big end of the spec i like hi crush.i like king over clevite never tried the ACL H bearings or engine pro i just may they seam good but the kings are more to size then the clevites. i like the speed pros with the 3/4 main but the size is all over the map and so is the tapper
    Last edited by pat mccarthy; 11-28-2007 at 06:12 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink