Well, had a rainy afternoon and a door panel was still off so I rolled the bottom of the vinyl off the panel, marked it and trimmed the panel 1/8". Re-glued the panel, and decided that stapling the seal to the panel with that little lip flush to the panel should work OK, letting the clips hold it all in place, and that seemed to work OK. Got it all on, panel in place and the door closed about 1/2 way before the sweep pinched and bound up - the door would close, but the sweep was too hard against the bottom of the door opening and pulled the interior panel loose at the bottom when I opened the door. Looks like this will be a trial & error process which would be much easier without the door panel upholstered. Also, I know that N&N hangs the door inners first, getting them all locked down & functioning, then glasses on the outer with proper body gaps. My inners could be sitting low compared to a stock door. Another day....