Thread: T-5 trans info needed
-
08-13-2004 09:23 PM #1
T-5 trans info needed
I am planning on installing a 302 and 5 speed in my 65 ford custom 500,I will be using the 65 clutch linkage and bellhousing and I need to know what trans to use. Do the trans have different gear ratios and how can you tell which trans have what ratios,I would like to keep the 3.00 to 1 rear gears so I would like to find a trans with a steeper first gear if possible. This combo is going to be used for gas mileage and I am only going to be using a stock motor,I dont know a thing about 5 speed trans so I need all the info I can get. Jeff
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-16-2004 08:14 PM #2
The Mustang 5 spd is a great swap over for the early Fords. I worked on a 65 Mustang that had a Mustang 5 spd and it was a sweet set up.
-
08-17-2004 05:51 AM #3
Thanks for the G-Force link, Tech. They have some nice product, any experience using their stuff????Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
08-17-2004 06:22 AM #4
Consider a Tremec 3550.Andy
My project build video:
http://www.youtube.com/watch?v=iubRRojY9qM
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance