Thread: Which clutch do I need? Chevy engine, Ford Trans

Tweet

Originally Posted by NTFDAY

Seems to me that you have it under control, good luck

So it is ok to back up the hole I need to drill/ tap with a nut and call it good?

The other 3 bolts and the bearing adapter I've got, it's just that one bolt because the hole only be ~1/8" or so deep in that area. I've got the other bell out, and getting ready to see how far off it is but just by looking quick, it will leave a bit under 1/2 of the trans face uncovered which is ok I guess