Thread: TH350 transmission question.
-
12-19-2011 01:40 PM #16
Oh no, Steve, it looks like the convertor to pump cover seal is doing it's job........it is bone dry in that area. The areas that are showing fluid wetness are shown in the picture below, in red.
Don
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
12-20-2011 01:31 AM #17
-
12-30-2012 11:55 AM #18
pump to case o-ring, pump shaft seal....most likely culprits....you should be able to look, feel, see where the trail of fluid is coming from....take the converter/bell housing cover off and look with a good lightBigMo
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project