Quote Originally Posted by 1gary View Post
We and I am including myself have much to offer in advise,but the advise I insist you could get for free is the TCI tech line.No cost if I didn't make my point clear.Do yourself a big favor,tomorrow call them up letting us know what they said and then tell you trans shop what you think is the problem armed with that information.Remember-it is cost free.

That line pressure isn't going to get it done.

Again

Home - TCI® Auto
Talked to a TCI tech as you recommended.
They're saying my line pressure is too low at 70psi. On a rebuilt transmission the pressure should be 110psi. Depending on what causes the pressure to be that low the constant pressure valve body they sell may or may not fix the pressure issue.
The guy said the tolerance on the output shaft bearing is 25/1000" which seems a lot to me. So it seems the slack in the output shaft is in fact normal.
He couldn't help me with my noise in OD with TC locked. Nobody seems to have had that ever before.
I'll be talking to the shop that built the trans next.

Thanks again everyone.