Thread: 700r4 TV Cable
-
06-16-2011 02:35 PM #1
700r4 TV Cable
Need some help new Edelbrock 800 carb. Who has the best TV cable for the 700R4 trans? hate to burn this thing up
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
06-17-2011 02:59 AM #2
Use a stock GM cable.
I had an aftermarket cable and it jammed up feeling as though I had achieved full pull at full throttle when in fact it was no where close.
You also need a carb bellcrank for the Eddy.
-
06-17-2011 04:44 AM #3
TCI sells a valve body that eliminates the critical TV cable adjustment.The TV cable is then used as a kickdown cable only.Good Bye
-
06-17-2011 04:49 PM #4
I have the TCI constant velocity/pressure all I can say is it works,.. but look I have maybe 20 miles on this 700r4, I still have some adjustments I think need to be made, as far as shift points, I also believe I chose the correct taxi/cop car feel. It is a crisp shift without being to harsh.Yet your experience my differ. I also put a trans pressure gauge on the column. I guess i should call TCI and make sure my pressure is correct. I made a mistake when I bought the gauge and it only goes to 100 psi, Reverse pegs the gauge and forward stays between 60 and 100 or so PSI
-
06-18-2011 03:39 AM #5
Thanks for the input there is a lot answers on how to go about this I just don't want to burn up a new transmission.
-
06-18-2011 06:36 PM #6
TCI's tech line is first class.Give them a call.Good Bye
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel