700r4 TV Cable

Need some help new Edelbrock 800 carb. Who has the best TV cable for the 700R4 trans? hate to burn this thing up:toocool:

Use a stock GM cable.
I had an aftermarket cable and it jammed up feeling as though I had achieved full pull at full throttle when in fact it was no where close.
You also need a carb bellcrank for the Eddy.

TCI sells a valve body that eliminates the critical TV cable adjustment.The TV cable is then used as a kickdown cable only.

I have the TCI constant velocity/pressure all I can say is it works,.. but look I have maybe 20 miles on this 700r4, I still have some adjustments I think need to be made, as far as shift points, I also believe I chose the correct taxi/cop car feel. It is a crisp shift without being to harsh.Yet your experience my differ. I also put a trans pressure gauge on the column. I guess i should call TCI and make sure my pressure is correct. I made a mistake when I bought the gauge and it only goes to 100 psi, Reverse pegs the gauge and forward stays between 60 and 100 or so PSI

Thanks for the input there is a lot answers on how to go about this I just don't want to burn up a new transmission.:toocool:

TCI's tech line is first class.Give them a call.