Thread: 1935-40 ford clutch linkage

Tweet

that's a pretty interesting set up dirt cop. I spent a lot of money 4 years ago on a brake/clutch pedal assembly with master cylinders then $100 for a braided line to go from this threaded Wilwood clutch master cylinder to the "push pin" slave all while having a stock Camaro clutch master in my possesion. It works great like I have it, but if I had to do it over I'd save the money.

For streetrodderbn though he would have to convert to a 6 speed overdrive t56..

The clutch system doesn't know what it is pushing on. The same system as I have can be used on a Muncie 4 speed except slave cylinder would be positioned to push to back of car, while the T56 slave cylinder pushes forward. I put the reservoir on a longer solid line in engine compartment. As long as reservoir is above master cylinder it will work. Just illustrating one way of doing a clutch setup.