Threaded View
-
12-01-2009 06:07 PM #1
3 speed auto with od from 94 chev 1500
Hope someone here can give me a little help. I have a good 85 350 engine from a 4x4 chevy with TBI, and a good 3 speed auto with od out of a 94 V6 1500. Will I have any problems mating the two? Problems, I mean like any electrical, wiring, ect. I'm taking the TBI off the 350 and going with a carb and older HEI. I do not want any problems I can not fix on the road if something happens. The transplant is going into a 1931 AA. I'm converting the old flatbed into a pickup. I already have the 29 A front axle and 40 Ford spindles. Disc brakes going up front with an early Bronko II rear with leaf springs. I won't be lowering the truck. I'll be running a set of 10:50x31's all the way around. This will be a daily driver. I'm not looking for power, just gas millage and reliability. Yes, I'll be running it in the snow up here in upper Michigan.
Moving on to next phase of frame reconstruction . Due to the Trans location I need to build a new center section for the X member. 1st cuts have been made . [/URL] I will use this 6"dia. ...
New Project