Thread: manual shift VB
-
11-29-2009 07:57 AM #1
manual shift VB
got the manual shift valve body for my thm350, In the instructions i remove the inter mediate servo piston assembly and discard. then plug the hole for the apply shaft. also i plug the 2nd gear accumulator passage.
Sounds like the band becomes a piece of flotsam, i am rebuilding the trans can i just leave the band out? I sure do not like the idea of it just rattling around in there.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-29-2009 01:54 PM #2
You can leave the band out,but keep the servo shaft in,(you won't have any braking when you downshift without the band or piston). I've built several this way,without any problems,although you make want it in for street use.
Brian
We did end up finding part of the problem, we did not put O-rings on the distributor shaft which was sending oil up the shaft instead of sending it to the lifters, adding O-rings quieted it down but...
New guy from Utah.