Thread: Transmission problem

Tweet

I have a quick question about my little street rod. I need to change the govenor on the 700r4 and need to know if this is messy and if there are any tricks to it. Hope someone can help me out. Thanks

Work this cover off and outward 360 degrees around. It's pressed in and can be a little sticky so be careful to be smooth and not warp or ding it up too badly.
Slide your old gov out, remember it turns a little when sliding.
Not too messy but will require a pan underneath it to capture the run off oil.

i have a th350 and the fluid levels are up to standard i will check the pan tomarrow for any pieces
but how do i know if it is the tranny or the torque converter