Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree4Likes

Thread: TH 400 Kickdown Switch
          
   
   

Reply To Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 26
  1. #1
    39Deluxe's Avatar
    39Deluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    Edgerton
    Car Year, Make, Model: 59 Corvette 283/270 69 C10 Stepside 355
    Posts
    161

    TH 400 Kickdown Switch

     



    I'm finishing up the odds and ends on my '69 C10 and I need to know what to do about a kickdown switch for the Turbo 400. I don't have a factory bracket or switch and the carb is a small OEM 1967 Chevy Holley.

    Can anyone point me in the right direction?

    Thanks,
    Tom





  2. #2
    hobo's Avatar
    hobo is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2006
    Location
    Indiana
    Car Year, Make, Model: 1969 Nova SS, 2009 Street Glide, 1980 FL
    Posts
    70

    Right or wrong, I decided to go with a switch that B&M makes. My local shop got it for me for around 30 bucks. It comes with brackets, wiring, etc. that will bolt up to the Holley throttle for WOT operation.

    I'm sure a lot of guys on the board have also rigged their own at the carb or at the pedal, so you'll likely get a lot of info on this...
    Don't ride/drive faster than your Guardian Angel can fly...

  3. #3
    nitrowarrior's Avatar
    nitrowarrior is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Mesa
    Posts
    1,385

    I have a silly question here. Why not go to the factory throttle pedal switch from the factory? C series trucks had the 400 tranny in them and even if yours didn't come with that tranny, the switch and set up is too easily available. Just my 2 cents worth.
    What if the "Hokey Pokey" is what it's really all about?

  4. #4
    PatMonaco's Avatar
    PatMonaco is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2006
    Location
    Rochester
    Car Year, Make, Model: 1930 Model A
    Posts
    101

    I use one of these on my Abone with a TH400. Pretty easy to install. Little pricey, but I've seen 'em on eGay used.

    http://cgi.ebay.com/ebaymotors/LOKAR...spagenameZWDVW

  5. #5
    39Deluxe's Avatar
    39Deluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    Edgerton
    Car Year, Make, Model: 59 Corvette 283/270 69 C10 Stepside 355
    Posts
    161

    I found the B&M part but it says to use with a stock throttle cable bracket. I didn't see the kit with bracket on the B&M site. Do you have a part number?

    I have every '67-'72 C10 Restoration parts catalog known to man and can't come up with a bracket. NAPA lists an oem switch. I notice that aftermarket throttle cable brackets are different for Holley and Q-Jet and since these engines didn't come with a Holley I'm thinking an aftermarket bracket will be the way I will have to go. I even looked in the Corvette catalogs for late '60s big block with Holley and TH400.

    A switch on the pedal would be nice to keep the clutter off of the engine. I may have to do some fabricating.

    I'll look at that Lokar too.

  6. #6
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,334

    Summit lists a Holley bracket for a TH 350, don't know if it'll work for a 400. Part # HLY-20-45
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  7. #7
    mopar34's Avatar
    mopar34 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Stewartstown
    Car Year, Make, Model: 34 Ply PE sdn; 57 Olds 88 J2
    Posts
    1,953

    I have the one from Lokar. Spiffy and pricely little bugger. One day I might get it out of the shrink wrap and put it on. My brother in law picked it up for me a while back and was going to put it on when he had my car, but later told me the car was quick enough and if he had installed it, I would probably just kill myself with the accelerator. So it is still in shrink wrap.
    Bob

    A good friend will come and bail you out of jail....but a true friend will be sitting next to you saying..."Damn....that was fun!

  8. #8
    PatMonaco's Avatar
    PatMonaco is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2006
    Location
    Rochester
    Car Year, Make, Model: 1930 Model A
    Posts
    101

    Bob...I know what you mean!!!! Since I had 3.73's in the rear, I really didn't think I needed the kickdown cable either. Once I put it on, look out! It really throws you back in the seat when ya push the pedal into passing gear.

    Pat
    hammer-time likes this.

  9. #9
    39Deluxe's Avatar
    39Deluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    Edgerton
    Car Year, Make, Model: 59 Corvette 283/270 69 C10 Stepside 355
    Posts
    161

    The B&M switch kit says that it mounts to a bracket for a TH 350. I would suppose where the cable mounts. I took a look at that Lokar kit. That would be a clean installation. Not cheap at $67. from Summit but it would be the easiest way out and look the best. My truck has 3.73s too but I'm carrying a little more weight than your A Bone. Gonna need that kickdown.

  10. #10
    nitrowarrior's Avatar
    nitrowarrior is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Mesa
    Posts
    1,385

    I wonder about the extra goodies under the hood. Requires trimming, routing, and dealing with asthetics for cleanliness. AMC, and GM ran the foot pedal switch for ever and it would be a much cleaner install that is tucked away and out of sight.
    What if the "Hokey Pokey" is what it's really all about?

  11. #11
    mopar34's Avatar
    mopar34 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Stewartstown
    Car Year, Make, Model: 34 Ply PE sdn; 57 Olds 88 J2
    Posts
    1,953

    I wonder about the extra goodies under the hood. Requires trimming, routing, and dealing with asthetics for cleanliness. AMC, and GM ran the foot pedal switch for ever and it would be a much cleaner install that is tucked away and out of sight.
    If I remember right, the Lokar unit mounts on the trans with only a single cable to the carb and one to the accelerator. Not much in sight to see, mostly under the car. But then again my memory isn't what it used to be and like I said the unit is still in shrink wrap.

    Pat - My car only has a 2.73 rear gear (Vette cruiser rear), but unleashing the power from the engine makes the car jump like a rabbit on steriods. Not sure if my heart can take any more thrill or if my reflexes could control it. Maybe one of these days when I need something to do, I'll open the shrinkwrap. If I don't like it, I can always keep my foot out of it.
    Bob

    A good friend will come and bail you out of jail....but a true friend will be sitting next to you saying..."Damn....that was fun!

  12. #12
    knucklehead's Avatar
    knucklehead is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2006
    Location
    714
    Car Year, Make, Model: 55 Belair, 53 Ranchwagon, 49 coupe
    Posts
    80

    Quote Originally Posted by 39Deluxe
    I'm finishing up the odds and ends on my '69 C10 and I need to know what to do about a kickdown switch for the Turbo 400. I don't have a factory bracket or switch and the carb is a small OEM 1967 Chevy Holley.

    Can anyone point me in the right direction?

    Thanks,
    Tom






    I could be wrong here, and if i am please correct me.

    I also have a turbo 400. i am using the lokar kickdown box and cable, my kickdown box requires a positive electrical connection, either batt or from ignition, (i forgot which one) that goes to the kickdown box, (which attaches to your trans). From the box it will go to an electrical connection already on your trans. The lokar kickdown still has the cable that attaches to the carb.

    I opened up the kickdown box before installing, when the cable is extended all the way, it makes contact with an electrical relay and sends that signal to your trans, i think i remember hearing that the signal operates something in you trans to help fluid flow better when it kicks down.

    maybe the ealier 400 trans are mechanical, i dont know, but i didnt see anything mentioned about it
    Attached Images
    Last edited by knucklehead; 03-19-2008 at 02:42 PM.
    If it aint broke, fix it till it is.

  13. #13
    39Deluxe's Avatar
    39Deluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    Edgerton
    Car Year, Make, Model: 59 Corvette 283/270 69 C10 Stepside 355
    Posts
    161

    On the Lokar kit that braided cable runs up to the eye on the bottom of the carb lever arm and is secured to a bracket that attaches to the back carb stud. That's all you see under the hood. I like the pedal mounted switch idea too. I'll have to spend some time in my parts books to see what I can find. There must be some kind of linkage and bracket that keeps it away from my big feet and controls the actuation so it doesn't kick own too soon.

    Al 400s were electric. My '67 442 had a big ugly rotary switch at the rear of the Q-Jet.

    Tom

  14. #14
    39Deluxe's Avatar
    39Deluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    Edgerton
    Car Year, Make, Model: 59 Corvette 283/270 69 C10 Stepside 355
    Posts
    161

    Well I found the pedal controlled kickdown switch in the parts book. It's still available from GM Parts Direct for under $15. The problem is that I would have to go to the boneyard to find the parts that aren't available. That includes the passenger car style gas pedal asm and the mounting bracket. The application is '71-'75 all passenger cars with THM 400. Since most small blocks and 6s had THM 350s in this time period I'd be looking for big block cars or maybe a rare small block car that someone optioned up to the THM 400 for towing. I'm not sure what the '73-87 trucks used for a gas pedal. I don't have one any more to look at.

    Anyway the Lokar is looking better all the time. I could spend more in gas trying to chase down parts that might work than to just online order from Summit.

  15. #15
    nitrowarrior's Avatar
    nitrowarrior is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Mesa
    Posts
    1,385

    Don't forget to include G series Vans in your search. Clean install, better clearancing because of the dog house they have to ride next to. I bring this idea forward because a lot of guys don't have much pedal room in their rods with tranny humps and cowl problems. Your '69 should be a snap to find the salvage yard stuff. 1 ton C series included because they share the same assembly.
    Last edited by nitrowarrior; 03-25-2008 at 04:44 AM.
    What if the "Hokey Pokey" is what it's really all about?

Reply To Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink