Thread: Sbc 400

Tweet

Could Anybody Tell Me More About This Stall Converter Made By J.w. Performance Converters,i Know Its A 4500 Stall 10''. I Bought It New For 650.00 Dollars.the Things Is I Want To Know If Its A Loose Stall Or A Tight Stall To Work With My Cam The Part # To This Stall Is 30444-j. My Cam Is A Howard Solid Roller Lift .582/.582 Lift,lobe Center Is 106 @242/242 Duration At .050. Will This Stall Work For Me

Its possible you could get more replies to your question if you dont label them all SBC 400.

That's a big stall 4500 for a 10" converter . But if it's a 4500 stall it should be Loose . I would try that camshaft with 1.52 rockers first . What size rear end are you going to run ?

Them the roller rockers i have 1.52 and i have 4.56 gears.

Originally Posted by demetrice askew

Them the roller rockers i have 1.52 and i have 4.56 gears.

Your car should run very well .