Hybrid View
-
03-11-2008 05:00 PM #1
Need Help With Stall Converter
Could Anybody Tell Me More About This Stall Converter Made By J.w. Performance Converters,i Know Its A 4500 Stall 10''. I Bought It New For 650.00 Dollars.the Things Is I Want To Know If Its A Loose Stall Or A Tight Stall To Work With My Cam The Part # To This Stall Is 30444-j. My Cam Is A Howard Solid Roller Lift .582/.582 Lift,lobe Center Is 106 @242/242 Duration At .050. Will This Stall Work For MeLast edited by demetrice askew; 03-11-2008 at 08:51 PM.
meat1037
-
03-11-2008 06:46 PM #2
Its possible you could get more replies to your question if you dont label them all SBC 400.Friends dont let friends drive fords!
-
03-11-2008 11:34 PM #3
That's a big stall 4500 for a 10" converter . But if it's a 4500 stall it should be Loose . I would try that camshaft with 1.52 rockers first . What size rear end are you going to run ?
-
03-12-2008 08:44 AM #4
Them the roller rockers i have 1.52 and i have 4.56 gears.meat1037
-
03-12-2008 01:25 PM #5
Originally Posted by demetrice askew
Ended up going with H-Pipe
Exhsust system