Thread: How to use transmission???
Hybrid View
-
03-11-2008 08:01 AM #1
The transmission is a TH 700R4.
-
03-11-2008 12:23 PM #2
Joe,I have the 700R4 tranny.I purchased my kit from TCI Pt#37660.It comes with Instructions.Good Luck
Link www.tciauto.comDon D
www.myspace.com/mylil34
-
03-11-2008 01:52 PM #3
http://www.technicalevolution.com/700inst.htm
http://purplesagetradingpost.com/sum.../techinfo.html
http://www.transmissioncenter.net/sp...n_______va.htm
http://purplesagetradingpost.com/sum...o/700R4p1.html
http://www.technicalevolution.com/coolflw.htm
http://www.tvmadeez.com/article/index.html
http://www.73-87.com/7387garage/drivetrain/lockup.htm
http://www.gearvendors.com/cgdrive.html
http://www.technicalevolution.com/lockup.htm
http://www.technicalevolution.com/tv.htm
And a valve body from TCI that eliminates TV cable problems......
700R4 Constant Pressure Valve Body
Eliminate TV Cable-Induced 700R4 Failures Forever!
The TCI® 700R4 Constant Pressure Valve Body eliminates the threat of a burned up 700R4 forever by eliminating the danger of transmission failure that results from an improperly installed or adjusted TV cable. In the past, the TV cable adjustment on GM 700R4 transmissions required near-expert mechanical ability. Though the TV cable still needs to be used to set part-throttle shift points, line pressure is fixed at a minimum of 200psi -with no chance of burning up transmission clutch plates due to a low line pressure condition.
TCI® 700R4 Constant Pressure Valve Body #376020Last edited by techinspector1; 03-11-2008 at 01:56 PM.
-
03-11-2008 02:02 PM #4
Hey thanks for the link. That site seems to have everything. So much in fact it confuses me!
I submitted an inquiry about my situation to their site.
Here is the desciption from the part number you gave me. Will this take care of it all. I am thinking I need some more stuff right?
"Universal Lock-up Kit - 376600
Installation of this kit makes retrofits into non-ECM 700R4 or 2004R vehicles a snap. System allows automatic operation of the TCC in 4th gear under stable engine operation, and disengages the clutch when accelerating or down shifting. Also provided in the kit is a manual override option. Constructed from OEM connectors and oil resistant wire, we install this kit in all our complete 700R4 & 2004R StreetFighter® Transmissions."
Remember, I have a motor and a transmission, flexplate, and a torque converter I beleive . That's it. No other cables, electronics, parts...
I will keep researching...
Thanks,
Joe






LinkBack URL
About LinkBacks
Reply With Quote
I'm happy to see it back up, sure hope it lasts.
Back online