where would I order it that they would ask all this? 1700 sounds good but I want to make sure that really is where it ends up working if those other things can throw it off.

It is a 51' F1, going to probably be a bit heavier than it was because we are replacing the floor of the bed with 10ga. steel rather than wood kit (not my call). I appreciate the help guys.

Denny, would I set the redline on the tach at about 5600 then? (the tach on there doesn't work, I know it isn't idling at 800 and I know it is revving a lot higher than about 3500 indicated) We are going with this gauge set probably.

http://www.classicinstruments.com/ga...&SeriesCode=HR