-
12-13-2003 03:04 PM #1
89 C-6 trans for a 460 CI engine
I have a 89 C-6 for a 460 that i want to put in a 76 lincoln continental with a 460 CI engine i would like to know if this will work. Is a 89 C-6 tranny the same as a 76 C-6 tranny. Thanks for all your help!!!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
12-13-2003 06:13 PM #2
The 89 tranny might be electronic and that could cause some problems, but if not, it should be identical to the earlier tranny.
-
12-13-2003 08:04 PM #3
The C-6 was not made in an electronic mode. There should not be a problem.Right engine, Wrong Wheels
-
12-13-2003 08:19 PM #4
i wouldnt run anything behind that big block but a C-6Ill take rust any day over that itchy ass fiberglass!
Pride is built, not bought !!
-
12-14-2003 05:34 AM #5
89 460 C-6
Thanks to all who replyed .That is the info i needed .You guys have been a great help !!!
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project