Thread: Gear position senders...
-
05-26-2007 05:53 AM #1
Gear position senders...
I currently have a lokar gear position sender to install on my 700r4 transmission, however i have recently changed plans and decided to purchase a Dakota digital gear position indicator which also has functions for high beam indicators etc. My question is am i stll able to utilise the Lokar sender? i would prefer to a) because i already have it and b) they look better than the Dakota ones...
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-26-2007 05:08 PM #2
Not sure on all the electrical stuff, if they are compatible or not. I do know with the Dakota Digital gauges, only their sender will work with the gear indicator built into the Dakota Digital speedo..... or that's the info in the Dakota Digital instructions, anyway. Don't know if that info will help, or confuse the issue!!!!!Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
05-27-2007 01:31 AM #3
I currently have these two items if it is any further information...
-
05-28-2007 12:14 AM #4
Here is the relevant part numbers
DGS-3 - Dakota digital gauge
INC-1736 - Lokar sender
Thanks for the help
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project