Thread: Automatic to a 4 speed HOW HARD

Tweet

First you need the measurements of the 4-speed you want to install, the measurements of the bellhousing from the block added to it, and then get under the Nova and measure from your block to the end of your tranny tailshaft. Any difference will have to be made up in your driveline.
Also measure from the front of the bellhousing to the tranny mount on the 4-speed, and compare it to the one on your automatic- any difference there will have to be made at the tranny crossmember.
Oh yeah- the clutch rod... I suggest a set of Lokar pedals & a hydraulic throw-out bearing...
Good Luck...