-
10-05-2007 04:37 AM #1
Drive shaft yoke insertion limits
We are thinking of moving my Dad's 31 chevy rear axle back about an inch to get the rear tires more centered in the wheel wells. We 'd love to be able to do this without having to have the drive shaft lengthened. We are wondering your guys opinions on the minimum amount of insertion the front yoke can have into the trans (turbo 350).
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-05-2007 04:52 AM #2
Switch to a longer yoke , Spicer part number 2-3-10391X has
a 4 3/4" long splines
-
10-05-2007 09:04 AM #3
Thx Hawk, its good to know that we have that option. I am just not sure at what point do we decide that the amount we have is not going to be safe...
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance