Rear Shocks

[Charlyg]

Hello all - Am Building a '46 Ford 2-dr Sedan - Rear end is 10 bolt Chev (86 Camaro) and believe shocks are from same. These are shot and I want to replace them with newer Chrome units (possibly Gas)They are 9 3/4 compressesed and 14 3/4 extended, covered, and eye on each end. Any suggestions as to brand names for new ones? Many Thanks in advance.

[Bob Parmenter]

The dimensions you post are pretty typical aftermarket hot rod parts. Here's one source for Pete & Jakes rear shocks, note this is not necessarily an endorsement for or against this vendor, it's a source for the Pete & Jakes part number;
http://www.rjays.com/Pete_Jakes/PJ_Shocks-01.htm

BTW, the actual P&J site doesn't give dimensions or prices so that's why I used a dealer site.

Another source is Chassis Engineering for their own shocks: http://www.chassisengineeringinc.com/page73.html

[Charlyg]

Thanks for the reply, guys. I appreciate it. Charlyg