Thread: rearend welding
Threaded View
-
09-15-2005 09:28 PM #1
rearend welding
After reading biglar's posts and the reply. I want to know if there is a proper technique to welding a rearend. I'm getting ready to put a four link in my truck and have never welded to an axle housing. Is there anything I need to watch for besides warpage. Also I'll be putting axle saddles in my F-100 when the time comes. I want it to be right the first time. I already have the angle finder for setting a pinion angle. I thought I was ready however I see there is a lot to screw up.
Lon
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance