Well, the 45 degree zerks half worked. In the top bosses, the were fint - but kind of ugly on an exposed front axle. When I installed the lower ones, they ended up pointing in the wrong direction. I got around the problem by installing a 45 loosely in each boss, pumping in the grease, then removing the 45 and installing the old short zerk.

I'm thinking about getting an extended zerk of some kind, removing the shorty zerks and installing plugs after I grease the axle. It would look smoother that way anyhow.

I sent an email to Pete and Jakes, since it's a Super Bell axle. I assume they've run into this problem before.

Denny,

Thanks for the offer, but let's wait and see what the Super Bell folks have to say.