Hey Ryan, I got the tabs thru Speedway. 9.99 a pair. Removable Brake Line Tabs
Working with Craig at Bowler we have the PCS Shift Controller and Paddles on their way. PCS has downloadable files available so I downloaded an IGES file of the paddles and added them into my Steering Wheel File.
Getting the paddles to work will require a fabbed adapter to go thru the paddles to pick up the steering wheel bolts. No biggie, I have a lot of 2 1/2" alum bar stock to make it out of.
https://images46.fotki.com/v1637/pho...OLUMN13-vi.jpg
With the 2" extension, the .81 thick paddle assembly and the 1/2" thick cover I am moving the steering wheel about 4" in the right direction. This should work well with the moderate set back of the driver seat.
Looking down the column.
https://images51.fotki.com/v1638/pho...COLUMN8-vi.jpg
here is the stack from the passenger side. The little silver part is the adapter I have to make. Everything else I will have.
This remote shifter thing was a bit spendy but it was something I needed to do to get the engine cover cleaned off. Too much stuff going on in too small of an area.
https://images59.fotki.com/v1640/pho...OLUMN14-vi.jpg
Hopefully the PCS stuff will get here in a timely manner.
Mark