Got the rear suspension assembled tonight. It still fits... which is a good thing.
I rolled the housing underneath the frame after rotating it flat on the rotisserie. The better half helped hold the housing while I got the bars slipped into place.
https://images41.fotki.com/v1634/pho...MVC002F-vi.jpg

https://images51.fotki.com/v1638/pho...MVC003F-vi.jpg
With the bars all bolted up and the panhard bar in place I used a couple of tie down straps to get it raised up so I could connect the shocks.
https://images12.fotki.com/v1641/pho...MVC005F-vi.jpg

https://images54.fotki.com/v1642/pho...MVC009F-vi.jpg

I was also working on the upper shock attachments. Right now there is a 1" hole drilled thru both sides of the upper cross member. I went to Durand and picked up a 4' piece of 1" O.D. x 1/4" wall D.O.M. and cut a couple of sleeves for the 1/2" bolts that hold the upper shock eyes. Once everything is pulled back apart I will weld these in.
https://images34.fotki.com/v1633/pho...MVC010F-vi.jpg

https://images12.fotki.com/v1641/pho...MVC011F-vi.jpg
Getting this hung in there tonight was enough for me. Tomorrow I'll start finishing up the brake line stuff.
Mark