Things are moving slowly on the van. I have been working on another "project" and the fall weather is making me take care of some "around the house" projects.
I have gotten a couple things done though. I ended up ordering some chromed pulleys from Jegs. Just to get the front dressed out and let me finish the alternator brackets. The pulleys needed a bit of work to get them tofit right but I did that last week and got the alt brackets done over the weekend.
I made the mounting studs from 3/8-16 threaded rod. Cut two to length and threaded them into the aluminum head as far as they would go. I will pull them out and put a little anti-sieze on them for final assembly. I will probably put some acorn nuts on them to clean them up.
http://images109.fotki.com/v144/phot...00_5268-vi.jpg
Here is a creen shot of my UG file for the bracket design... Looks pretty close doesn't it?
http://images55.fotki.com/v585/photo...RNATOR1-vi.jpg
I used 1" dia aluminum to make the spacers. Bored them out on the lathe and put a nice polish on them after I faced them to length.
http://images107.fotki.com/v159/phot...00_5271-vi.jpg
The brackets will get sand blasted and powder coated black after I smooth out the edges.
The pulleys will get the motor running and drivable but I plan to upgrade them to polished aluminum when the van is on it's way to completion.
http://images59.fotki.com/v683/photo...00_5267-vi.jpg
I have a chromed fan and pulley for the alt and am waiting on the power steering pulley to show up.
Mark