Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree6Likes
  • 1 Post By firebird77clone
  • 2 Post By Hotrod46
  • 1 Post By Hotrod46
  • 1 Post By Hotrod46
  • 1 Post By 53 Chevy5

Thread: Help with my air filter
          
   
   

Reply To Thread
Results 1 to 15 of 15
  1. #1
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    Help with my air filter

     



    This has to be the biggest eye sore for this motor, the air filter sticking out like a donkey turd. I absolutely can't figure out what to do with it. I was thinking about sticking it in the front wheel well inside of a box with a cold air intake hole cut out behind the grill. The problem with that is If something wouldn't work, I would have made a mess out of a lot of things like a 4 inch holes that would need patching. Another option would be making and old looking oil bath style filter with my element in it and mounting that somewhere under the hood . Most pics of these things with the 5.3 show the filter where I have it, I've stared at it a lot and I'm running out of idea's. It does work where it's at but my intake temps are plenty high with it sucking hot radiator fan air all the time.
    Attached Images
    Last edited by 53 Chevy5; 03-11-2018 at 06:33 PM.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  2. #2
    Scooting's Avatar
    Scooting is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2008
    Location
    Rio Rancho
    Car Year, Make, Model: 1940 Ford Sedan
    Posts
    537

    Perhaps 2ea 90 degree turns would lay the air filter back on top of the motor horizontal?
    Your thought of running a tube to locate the filter out of sight is very valid. Lets see what others imagine. Wonder if someone can come up with a fancy cover in another position?

  3. #3
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,606

    What if you built a box mounted above the intake? Maybe use 1 or 2 of those flat air filters the new cars use?

    Re-use the 90' ell up into the box... you'll still need to pull air from above the motor, but it should be slightly cooler being further from the radiator.

  4. #4
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    If you go the dress up route, make a cover that hides it all, and integrate an air filter. Fiberglass mayde, art deco..

    But now you're pretty, and still sucking hot air.

    Better to just plumb it out of sight, and get cool air.
    Plumb it
    NTFDAY likes this.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  5. #5
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    So far I'm leaning toward moving it in the fender well. I was thinking about it today and it would get the best air there, and if I make the box first, I should be able to tell if it's all going to work b/f I start cutting a 4 inch hole for my pipe in the fender well. I've messed up a lot of stuff in my life thinking it would work so I'm a bit gun shy. I didn't really think of using the flat filters on top of the intake. I was using the round one in my mind and it would get freakishly tall with that on top, even if it laid sideways. Keep the idea's coming though, thanks.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  6. #6
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    I was thinking oval, for the integrated cover. More surface area, plus it would sit lower.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  7. #7
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,606

    Or, mount the box on top to connect to a working hood scoop.

  8. #8
    Hotrod46's Avatar
    Hotrod46 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    Vidalia
    Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
    Posts
    1,496

    Seth, here's a link to something that Spectre sells. It mounts the filter back over the top of the intake and is short coupled at the throttle body. They're pretty proud of it though, but you might be able to keep the current element. You might be able to build something similar, cheaper.

    https://www.spectreperformance.com/s...spx?prod=98261

    Here's what it looks like installed.

    https://www.spectreperformance.com/b...0-to-sema-show

    I'm not sure how it would work with the MAF. They can be pretty picky about where they are in the system. I found a honeycomb air flow "straightener" that I was looking at for my build that smooths out the air entering the MAF and lets it work in shorter than optimum installations. The honeycomb stuff is pretty cheap, too.
    Last edited by Hotrod46; 03-12-2018 at 04:56 PM.
    glennsexton and rspears like this.
    Mike

    I seldom do anything within the scope of logical reason and calculated cost/benefit, etc-
    I'm following my pass​ion

  9. #9
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    Holy cow, they are proud of that, It does look pretty sweet though. I may have been over thinking this thing. I thought about it today and was wondering why couldn't I use a factory 5.3 or whatever fits best box and mount that inside the fender? That would save a lot of fabricating and I would only have to modify the bottom end to my cold air intake behind the grill. Here is how the piping would look-ish in the engine compartment, it would have to be angled forward more though.
    Attached Images
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  10. #10
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    Quote Originally Posted by Hotrod46 View Post
    I'm not sure how it would work with the MAF. They can be pretty picky about where they are in the system. I found a honeycomb air flow "straightener" that I was looking at for my build that smooths out the air entering the MAF and lets it work in shorter than optimum installations. The honeycomb stuff is pretty cheap, too.
    Could that be the reason mine always seems to hunting or idle up and down a bit? I've put intake gaskets in, swapped intakes, pretty much checked everything and got it a lot better than it was at first but not perfect.I gave up on it.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  11. #11
    Hotrod46's Avatar
    Hotrod46 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    Vidalia
    Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
    Posts
    1,496

    Quote Originally Posted by 53 Chevy5 View Post
    Could that be the reason mine always seems to hunting or idle up and down a bit? I've put intake gaskets in, swapped intakes, pretty much checked everything and got it a lot better than it was at first but not perfect.I gave up on it.
    That's a definite possibility. I seem to remember reading that the MAF likes about 4 tubing diameters in front and doesn't like to be too close to the throttle body. Turbulence in the tube will cause erratic flow readings. The ECU gets confused about what is actually going on with the motor. This was for an LS3 blade type MAF that just fits into a flange welded to the tube. The type your running may not be as sensitive, but they are all affected by turbulence.

    Here is a link to the air flow straightener that I mentioned. I bought a 4" diameter 8 to 1 ratio piece.

    Honeycomb for MAF

    At less than $20, it's worth a try. My plan was to mount the MAF close to the filter and use the 8 to 1 honeycomb to smooth the air entering the MAF. This would allow me to have as long a tube as possible in front of the throttle body. Of course, now I've decided to do an aftermarket (Holley) ECU, so I won't even be needing a MAF. The Holley unit is speed density. Just more junk to added to the evergrowing "to be sold" pile.
    53 Chevy5 likes this.
    Mike

    I seldom do anything within the scope of logical reason and calculated cost/benefit, etc-
    I'm following my pass​ion

  12. #12
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    I'll be interested in how you like the Holley kit when you get it running. I've always weighing the pro's and cons of running a 5.3 with the Holley set up or running an LS1 in the 82 Z28. Edit- Never mind, I re read and you said ECU, not the whole Sniper kit.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  13. #13
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,333

    IMHO, too much turbulence and moisture contamination mounted in the fender well. Would bends of PVC schedule 40 work?
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  14. #14
    Hotrod46's Avatar
    Hotrod46 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    Vidalia
    Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
    Posts
    1,496

    Actually, I bought a Holley Terminator LS kit when they were running the Christmas sale. It comes with everything needed to electrically get a a factory fuel injected LS engine going. I didn't need a trans control, so I got the less expensive kit. It even comes with an LCD handheld touch screen.

    Holley only makes 2 stand alone ECU's, the HP and the Dominator. It doesn't matter what decal is on it. My Terminator ECU can be upgraded to HP firmware for free and I intend to do that. It even came with the software for laptop programing, but you can download it for free off Holley's website. I did that and played around with it before I pulled the trigger on the purchase. Both the HP and the Dominator have the self learning ability of the Sniper. At least on the fuel tables.

    The HP has 4 pretty comprehensive user programmable inputs and 4 outputs. That looks like it'll be plenty for my car. I wanted to be able to do at least some of my own tuning and the Holley system looked to be simpler to get a handle on than retuning the stock ECU.

    I'll definitely keep everyone up to date on how it works out. That reminds me that I really need to post some new stuff on my build thread.
    Last edited by Hotrod46; 03-12-2018 at 08:40 PM.
    34_40 likes this.
    Mike

    I seldom do anything within the scope of logical reason and calculated cost/benefit, etc-
    I'm following my pass​ion

  15. #15
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    Quote Originally Posted by NTFDAY View Post
    IMHO, too much turbulence and moisture contamination mounted in the fender well. Would bends of PVC schedule 40 work?
    It would be in a box so the only air it would get would be from the grill area.Otherwise, your right, it would be a terrible environment.
    Dave Severson likes this.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink