Quote Originally Posted by BIG-JIM View Post
Again it should be straight forward but it wont be because I added the second set of signals in the center that I want to use as just signals. I don't want them to come on as running lights or as brake lights. If there is a way I will find it just takes time...sigh.
If I understand you correctly, you have a seperate center type light you want to come on with turn signals, but not come on with the brakes?
It is a little more complicated as the brake filament is what is controlled by the turn signal circuit. Essentially the brake circuit is interrupted by the turn signal switch sending the desired side through a flasher to blink the brake filament. There were some turn switches designed to do this, not sure if they are available for your column (or at all anymore). However, a electronic circuit could be designed to do this with your existing switches.