Threaded View
-
02-03-2013 10:40 AM #4
Good idea, but the bench has two, and the buckets will need two each. Ideally you can get mounts with the buckets you're going to use, and modify/adapt them to fit the '59? That's what I did, unbolting the Fiero seats from the bottom side of the Fiero, then mounting the stock sliders to the floor of the '33. Luckily both were dead flat!Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy