Thread: 'Need some advice',,
Hybrid View
-
04-01-2012 08:37 AM #1
Thanks David,,,I don't think I have any "white teflon" lined hoses in My ride but I will certainly check it out.
I put a "cover" over the opening of my blower and that seems to have helped a lot since the 2 carbs are sitting right there and with no cover,the fumes can just roll out!NICE GUYS FINISH FIRST.....
-
04-01-2012 02:41 PM #2
That's like puttin a Band-Aid on it.
Still doesnt slove the problem.When I get to where I was goin, I forgot why I went there>
-
04-01-2012 02:49 PM #3
Glad You always so concerned with My rod,,,,anyways,,that's not all i did.
I put a thicker seal and some tighter bolt around the fuel sending unit on top of the fuel cell,,also added a "one way" valve on the venting hose,,along with a few other tricks.
The smell is all but gone,,,,again,,,thanks for your,,,,,,, advice???NICE GUYS FINISH FIRST.....
-
04-01-2012 07:27 PM #4
That rod was screaming for a mooneyes cover, anyway..
Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
EG
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy