Well , I found this,it is a 66 but I bet it would be the same.
Accepted Answer
Expert: John replied 871 days and 3 hours ago.

Hi my name is John.



1 remove the hood,right hinge support bracket and the right hinge and mounting.

2 Loosen the wiring harness from the right fender and move harness to one side.

3drain cooling system and disconnect heater hoses from core and move out of way.

4 Run a strip of masking tape down the leading edge of the right front door to protect edge.

5 Unfasten at the rear of the right front fender,the bolts holding the fender to the body.

6 Block fender away from body and remove bolts holding heater housing to the dash.

7 Lift the fender and pull out the heater housing and core assembly.

8 Take cover off the housing and remove core.



Let me know if you need more.



If I have help you,please push the accept button when were done.



Thank you for choosing just answer


Expert Type master tech
Pos. Feedback: 100.0 %
Accepts: 20
Answered: 7/19/2009
Experience: A1-A8,Li,B5,T2 ASE,triple chrysler master tech,HEV spec.

Ask this Expert a Question >