ok guys i need help i have posted this concern here before i have a 61 galaxie 352fe rebuilt 200 miles ago i run 210-225 no matter what i do its a mec guage in the intake stock location so i no that is the tru temp. 180 thermosdat (have tried 160 and no stat) i have a big oversized aluminum rad electric 16" procomp fan the engine has and over sized proformer cam intake and carb msd 6a box wires and a petronix ignitor 2 with no vacume advance. i have asked this question before on here everbody said timeing issue the timming seems way advanced to me but i backed it down a bit and it made it run terable when warmed up and it ran hotter temp (i think me timeing pointer may be bent) im going to run it to tdc and check and corect that if needed but my question is do you think that a timeing issue will cause these temps and are FE blocks known for this thanks and dont be to hard on me lol