Thread: where to run wires through the firewall?

Tweet

Originally Posted by 35fordcoupe

Low next to the toe boards on the firewall (not actually through the toe boards?) on either side for the light wires and behind the distributor up higher for the engine harness?

I was only thinking about the engine wiring right now (don't have the rest of the wiring right now anyway). I have a chevy, but the distributor isn't where it should be its on the front of the engine , but lower under the water pump...not the like Fords . so if I run the engine wiring up there it will be a huge eye sore hmm..

the engine wires just under the top of the bell housing . the light wires out just be low the fire wall .i make them like i said left and right side. so two holes. so theres no cross over to the right fender .i mount the coil on the in side of the fire wall with a thru hook up a long with the MSD box if you have one but do it any way you like i done many this way you only see wires for the dist and the wire for the alt