Thread: where to run wires through the firewall?

Tweet

That sounds like a good idea Bob I was looking at that as long as i have enough wire to run it down there, in and all the way across from the passenger side to the drivers side. I think I am going to weld a piece of angle iron across under the dash (from one side at the seam in the cowl to the other) to mount my computer behind the glove box and then run the wires across that to the drivers side. I was thinking about the wires being in the way of the insulation and carpet and all when on the inside of the firewall so this should all solve that..

I should be good as long as I have enough wire..thanks guys!

Since my engine is set way back I ended up with the MSD in the engine recess, I bought one of these firewall pass through's from Watson's Street Works. There are about 10 wires, most in the 16 and 14 awg size