Thread: 500 Caddy/G Body Swap
Results 1 to 15 of 167
LinkBack URL
About LinkBacksThreaded View
-
10-25-2009 04:35 PM #11
CHR Member
- Join Date
- Mar 2003
- Location
- SW Arizona
- Car Year, Make, Model: 68 Ply Valiant, 83 El Camino
- Posts
- 3,872
Well I got the nose to come down a bit
Yep I got the 500 sitting in it now. It fits but it's a lot more snug than it looks at a glance. The exhaust manifolds are a bit tight and I may have to relieve the frame just a bit for pipe clearance. The steering clearance is adequate but I wouldn’t want it any closer and it looks like I’ll have just enough room to close the hood with a 1” carb spacer and drop base air cleaner. Thank god I’ll be running aftermarket AC to I didn’t have to trim the stock AC box. Basically there is just one sweet spot to make it fit.
Anyway here it sits, and the next project will be to get a crossmember built (the trans mount is farther back on the TH400 than the original Th250. It was a good way to spend a weekend
I've NEVER seen a car come from the factory that couldn't be improved..... 
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Either return this forum to what was or get the HELL OUT!
Dead!